CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2] CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2] ClutchMax VEHICLE APPLICATION Fits 2010 - 2015 Chevrolet Camaro SS (6.2L OHV 8cyl LS3; 5th gen) Fits 2014 - 2015 Chevrolet Camaro Z/28 (7.0L OHV 8cyl LS7; 5th gen)   Important Note: High performance clutch and flywheel kit must be used together as a set without reusing existing components   ClutchMax Stage 2 Clutch Kit and HD Nodular Flywheel set key features: Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel. Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant. Reinforced diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability. Disc made from carbon kevlar composite friction with precision broached sprung hub for outstanding holding power and extended clutch lifespan. Properly suited for daily use, performance street driving and moderate track use.   Torque Capacity:  565 lb-ft Horsepower Rating:  582 HP Recommended break-in period:  500 mile   What' included in this complete bundle set: 1 each HD Nodular Cast Flywheel (23.26 lbs, flat step, 168 ring gear) 1 each Performance HD Pressure Plate (Non Self-Adjust Type) 1 each Performance Stage 2 Carbon Kevlar Composite Disc (11-3/4" x 1-1/8" x 26) 1 each Internal Concentric Slave Cylnder (CSC) Bearing Unit 1 each Pilot Bearing 1 each Alignment Tool Clutch Installation Guide Note: High performance clutch and flywheel conversion kit must be used together as a set without reusing existing components 
ClutchMax

CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2]

Code: CM04804HDWS-FW167578-ST2
Add Your Review
CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2] CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2] CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2] CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2] CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2] CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2]
CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2]
CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2] CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2] CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2] CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2] CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2] CLUTCHMAX STAGE 2 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04804HDWS-FW167578-ST2]
$350.00
In Stock
Add to Wishlist Add to Compare
Category: Chevrolet

  • 1-4 DAYS DELIVERY

  • 100% ORIGINAL AND QUALITY

  • 12 MONTHS / 15,000 MI GUARANTEE

VEHICLE APPLICATION

  • Fits 2010 - 2015 Chevrolet Camaro SS (6.2L OHV 8cyl LS3; 5th gen)
  • Fits 2014 - 2015 Chevrolet Camaro Z/28 (7.0L OHV 8cyl LS7; 5th gen)

 

Important Note: High performance clutch and flywheel kit must be used together as a set without reusing existing components

 

ClutchMax Stage 2 Clutch Kit and HD Nodular Flywheel set key features:

  • Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel.
  • Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant.
  • Reinforced diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability.
  • Disc made from carbon kevlar composite friction with precision broached sprung hub for outstanding holding power and extended clutch lifespan.
  • Properly suited for daily use, performance street driving and moderate track use.

 

Torque Capacity:  565 lb-ft

Horsepower Rating:  582 HP

Recommended break-in period:  500 mile

 

What' included in this complete bundle set:

  • 1 each HD Nodular Cast Flywheel (23.26 lbs, flat step, 168 ring gear)
  • 1 each Performance HD Pressure Plate (Non Self-Adjust Type)
  • 1 each Performance Stage 2 Carbon Kevlar Composite Disc (11-3/4" x 1-1/8" x 26)
  • 1 each Internal Concentric Slave Cylnder (CSC) Bearing Unit
  • 1 each Pilot Bearing
  • 1 each Alignment Tool
  • Clutch Installation Guide
  • Note: High performance clutch and flywheel conversion kit must be used together as a set without reusing existing components 

VEHICLE APPLICATION

  • Fits 2010 - 2015 Chevrolet Camaro SS (6.2L OHV 8cyl LS3; 5th gen)
  • Fits 2014 - 2015 Chevrolet Camaro Z/28 (7.0L OHV 8cyl LS7; 5th gen)

 

Important Note: High performance clutch and flywheel kit must be used together as a set without reusing existing components

 

ClutchMax Stage 2 Clutch Kit and HD Nodular Flywheel set key features:

  • Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel.
  • Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant.
  • Reinforced diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability.
  • Disc made from carbon kevlar composite friction with precision broached sprung hub for outstanding holding power and extended clutch lifespan.
  • Properly suited for daily use, performance street driving and moderate track use.

 

Torque Capacity:  565 lb-ft

Horsepower Rating:  582 HP

Recommended break-in period:  500 mile

 

What' included in this complete bundle set:

  • 1 each HD Nodular Cast Flywheel (23.26 lbs, flat step, 168 ring gear)
  • 1 each Performance HD Pressure Plate (Non Self-Adjust Type)
  • 1 each Performance Stage 2 Carbon Kevlar Composite Disc (11-3/4" x 1-1/8" x 26)
  • 1 each Internal Concentric Slave Cylnder (CSC) Bearing Unit
  • 1 each Pilot Bearing
  • 1 each Alignment Tool
  • Clutch Installation Guide
  • Note: High performance clutch and flywheel conversion kit must be used together as a set without reusing existing components 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)