CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1] ClutchMax VEHICLE APPLICATION Fits 2005 - 2007 Chevrolet Corvette (6.0L OHV 8cyl LS2) Fits 2008 - 2013 Chevrolet Corvette (6.2L OHV 8cyl LS3) Fits 2010 - 2013 Chevrolet Corvette Grand Sport (6.2L OHV 8cyl LS3) Fits 2006 - 2013 Chevrolet Corvette Z06 (7.0L OHV 8cyl LS7) Fits 2013 - 2013 Chevrolet Corvette 427 convertible (7.0L OHV 8cyl LS7)   ClutchMax Stage 1 CSC Clutch Kit and HD Nodular Flywheel set key features: Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel. Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant. Reinforced diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability. Disc made from HD woven organic friction with high copper contents for greater burst strength and durability. Properly suited for daily use, performance street driving and light track use.   Torque Capacity:  535 lb-ft Horsepower Rating:  548 HP Recommended break-in period:  500 mile   ClutchMax Stage 1 CSC Clutch Kit and HD Nodular Flywheel set comes with: 1 each HD Nodular Flywheel  (168 ring gear, flat step, 23.26 lbs) 1 each Performance Pressure Plate (Non Self-Adjust Type) 1 each Performance Stage 1 HD woven Clutch Disc (11-3/4" x 1-1/8" x 26) 1 each CSC Slave Cylinder Bearing Unit 1 each Pilot Bearing 1 each Alignment Tool Clutch Installation Guide Note: Our conversion kit must be used together as a kit without reusing existing components.
ClutchMax

CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1]

Code: CM04803HDWS-FW167578-ST1
Add Your Review
CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1]
CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1]
CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDWS-FW167578-ST1]
$385.00
In Stock
Add to Wishlist Add to Compare
Category: Chevrolet

  • 1-4 DAYS DELIVERY

  • 100% ORIGINAL AND QUALITY

  • 12 MONTHS / 15,000 MI GUARANTEE

VEHICLE APPLICATION

  • Fits 2005 - 2007 Chevrolet Corvette (6.0L OHV 8cyl LS2)
  • Fits 2008 - 2013 Chevrolet Corvette (6.2L OHV 8cyl LS3)
  • Fits 2010 - 2013 Chevrolet Corvette Grand Sport (6.2L OHV 8cyl LS3)
  • Fits 2006 - 2013 Chevrolet Corvette Z06 (7.0L OHV 8cyl LS7)
  • Fits 2013 - 2013 Chevrolet Corvette 427 convertible (7.0L OHV 8cyl LS7)

 

ClutchMax Stage 1 CSC Clutch Kit and HD Nodular Flywheel set key features:

  • Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel.
  • Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant.
  • Reinforced diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability.
  • Disc made from HD woven organic friction with high copper contents for greater burst strength and durability.
  • Properly suited for daily use, performance street driving and light track use.

 

Torque Capacity:  535 lb-ft

Horsepower Rating:  548 HP

Recommended break-in period:  500 mile

 

ClutchMax Stage 1 CSC Clutch Kit and HD Nodular Flywheel set comes with:

  • 1 each HD Nodular Flywheel  (168 ring gear, flat step, 23.26 lbs)
  • 1 each Performance Pressure Plate (Non Self-Adjust Type)
  • 1 each Performance Stage 1 HD woven Clutch Disc (11-3/4" x 1-1/8" x 26)
  • 1 each CSC Slave Cylinder Bearing Unit
  • 1 each Pilot Bearing
  • 1 each Alignment Tool
  • Clutch Installation Guide
  • Note: Our conversion kit must be used together as a kit without reusing existing components.

VEHICLE APPLICATION

  • Fits 2005 - 2007 Chevrolet Corvette (6.0L OHV 8cyl LS2)
  • Fits 2008 - 2013 Chevrolet Corvette (6.2L OHV 8cyl LS3)
  • Fits 2010 - 2013 Chevrolet Corvette Grand Sport (6.2L OHV 8cyl LS3)
  • Fits 2006 - 2013 Chevrolet Corvette Z06 (7.0L OHV 8cyl LS7)
  • Fits 2013 - 2013 Chevrolet Corvette 427 convertible (7.0L OHV 8cyl LS7)

 

ClutchMax Stage 1 CSC Clutch Kit and HD Nodular Flywheel set key features:

  • Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel.
  • Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant.
  • Reinforced diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability.
  • Disc made from HD woven organic friction with high copper contents for greater burst strength and durability.
  • Properly suited for daily use, performance street driving and light track use.

 

Torque Capacity:  535 lb-ft

Horsepower Rating:  548 HP

Recommended break-in period:  500 mile

 

ClutchMax Stage 1 CSC Clutch Kit and HD Nodular Flywheel set comes with:

  • 1 each HD Nodular Flywheel  (168 ring gear, flat step, 23.26 lbs)
  • 1 each Performance Pressure Plate (Non Self-Adjust Type)
  • 1 each Performance Stage 1 HD woven Clutch Disc (11-3/4" x 1-1/8" x 26)
  • 1 each CSC Slave Cylinder Bearing Unit
  • 1 each Pilot Bearing
  • 1 each Alignment Tool
  • Clutch Installation Guide
  • Note: Our conversion kit must be used together as a kit without reusing existing components.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)