CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1] ClutchMax VEHICLE APPLICATION Fits 1970 - 1976 Ford F-100, F-150, F-250, F-350 (5.0L OHV 8cyl 302cu in) Fits 1977 - 1977 Ford F-100, F-150, F-250, F-350 (5.0L OHV 8cyl 302cu in; See 'note' below)   Note: Fits vehicles with last 6 VIN number up to Y80,000 for 1977 model year. Replaces factory lever type clutch with heavy-duty diaphragm type clutch and nodular ductile iron flywheel.   ClutchMax Stage 1 Clutch Kit and Flywheel set key features: Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel. Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant. Diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability. Disc made from HD woven organic facing with high copper contents for greater burst strength and durability. Properly suited for daily use, performance street driving and light track use.   Torque Capacity:  425 lb-ft Horsepower Rating:  365 HP Recommended break-in period:  500 mile   What's included in this complete bundle set: HD Nodular Flywheel (28.5 lbs, 164 ring gear) Performance HD Pressure Plate Performance Stage 1 HD Woven Organic Disc (11" x 1-1/16" x 10 spline) HD Throw-out Bearing HD Pilot Bearing A set of 6 each pressure plate bolts Alignment Tool Clutch Installation Guide
ClutchMax

CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1]

Code: CM07227HDFW-ST1
Add Your Review
CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1]
CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1]
CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM07227HDFW-ST1]
$285.00
In Stock
Add to Wishlist Add to Compare
Category: Ford

  • 1-4 DAYS DELIVERY

  • 100% ORIGINAL AND QUALITY

  • 12 MONTHS / 15,000 MI GUARANTEE

VEHICLE APPLICATION

  • Fits 1970 - 1976 Ford F-100, F-150, F-250, F-350 (5.0L OHV 8cyl 302cu in)
  • Fits 1977 - 1977 Ford F-100, F-150, F-250, F-350 (5.0L OHV 8cyl 302cu in; See 'note' below)

 

Note: Fits vehicles with last 6 VIN number up to Y80,000 for 1977 model year. Replaces factory lever type clutch with heavy-duty diaphragm type clutch and nodular ductile iron flywheel.

 

ClutchMax Stage 1 Clutch Kit and Flywheel set key features:

  • Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel.
  • Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant.
  • Diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability.
  • Disc made from HD woven organic facing with high copper contents for greater burst strength and durability.
  • Properly suited for daily use, performance street driving and light track use.

 

Torque Capacity:  425 lb-ft

Horsepower Rating:  365 HP

Recommended break-in period:  500 mile

 

What's included in this complete bundle set:

  • HD Nodular Flywheel (28.5 lbs, 164 ring gear)
  • Performance HD Pressure Plate
  • Performance Stage 1 HD Woven Organic Disc (11" x 1-1/16" x 10 spline)
  • HD Throw-out Bearing
  • HD Pilot Bearing
  • A set of 6 each pressure plate bolts
  • Alignment Tool
  • Clutch Installation Guide

VEHICLE APPLICATION

  • Fits 1970 - 1976 Ford F-100, F-150, F-250, F-350 (5.0L OHV 8cyl 302cu in)
  • Fits 1977 - 1977 Ford F-100, F-150, F-250, F-350 (5.0L OHV 8cyl 302cu in; See 'note' below)

 

Note: Fits vehicles with last 6 VIN number up to Y80,000 for 1977 model year. Replaces factory lever type clutch with heavy-duty diaphragm type clutch and nodular ductile iron flywheel.

 

ClutchMax Stage 1 Clutch Kit and Flywheel set key features:

  • Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel.
  • Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant.
  • Diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability.
  • Disc made from HD woven organic facing with high copper contents for greater burst strength and durability.
  • Properly suited for daily use, performance street driving and light track use.

 

Torque Capacity:  425 lb-ft

Horsepower Rating:  365 HP

Recommended break-in period:  500 mile

 

What's included in this complete bundle set:

  • HD Nodular Flywheel (28.5 lbs, 164 ring gear)
  • Performance HD Pressure Plate
  • Performance Stage 1 HD Woven Organic Disc (11" x 1-1/16" x 10 spline)
  • HD Throw-out Bearing
  • HD Pilot Bearing
  • A set of 6 each pressure plate bolts
  • Alignment Tool
  • Clutch Installation Guide

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)