CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1] ClutchMax VEHICLE APPLICATION Fits 1969 - 1974 Chevrolet  Blazer (4.1L 250ci L6) Fits 1969 - 1976 Chevrolet C10, C20; Pickup (4.1L 250ci L6) Fits 1967 - 1979 Chevrolet Camaro (3.8L 230ci L6; 3.8L 231ci V6; 4.1L 250ci L6) Fits 1967 - 1981 Chevrolet Camaro (4.9L 302ci; 5.0L 305ci; 5.0L 307ci; 5.3L 327ci; 5.7L 350ci V8) Fits 1964 - 1973 Chevrolet Chevelle (3.2L 194ci, 3.8L 230ci, 4.1L 250ci L6) Fits 1964 - 1973 Chevrolet Chevelle (4.6L 283ci; 5.0L 307ci; 5.4L 327ci; 5.7L 350ci V8) Fits 1957 - 1978 Chevrolet Corvette (4.6L 283ci; 5.3L 327ci; 5.7L 350ci; 7.0L 427ci V8) Fits 1964 - 1981 Chevrolet El Camino (3.2L 194ci, 3.8L 230ci, 4.1L 250ci L6) Fits 1964 - 1981 Chevrolet El Camino (4.6L 283ci, 5.0L 305ci, 5.3L 327ci, 5.7L 350ci V8) Fits 1975 - 1976 Chevrolet G10, G20 (4.1L 250ci L6) Fits 1975 - 1976 Chevrolet K10, K20 (4.1L 250ci L6) Fits 1976 - 1981 Chevrolet Monte Carlo (3.3L 200ci, 3.8L 231ci V6; 5.0L 305ci V8)  Fits 1975 - 1976 GMC C15, C25 (4.1L 250ci L6) Fits 1975 - 1976 GMC G15 (4.1L 250ci L6) Fits 1967 - 1981 Pontiac Firebird (3.8L 230ci L6; 3.8L 231ci V6; 4.1L 250ci L6) Fits 1967 - 1981 Pontiac Firebird (4.9L 302ci; 5.0L 305ci; 5.3L 327ci; 5.7L 350ci V8) Fits 1964 - 1965 Pontiac GTO (6.4L 389ci V8) Also fits most GM vehicles with 10.4" clutch and 153 ring gear teeth flywheel. Please refer to compatibility fitment chart.   ClutchMax Stage 1 Clutch Kit and HD Flywheel set key features: Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel. Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant. Diaphragm springs made from 51CrV4 steel (imported from Germany) endure a multiple stage, heat-treating process for uncompromising performance and durability. Disc made from HD woven organic friction with high copper content for greater burst strength and durability. Properly suited for daily use, performance street driving and light track use.   Torque Capacity:  336 lb-ft Horsepower Rating:  284 HP Recommended break-in period:  500 mile   What's included in this complete bundle set: Nodular Ductile HD Flywheel (17.08 lbs; 153 ring gear) Performance 10.4" HD Reinforced Pressure Plate Performance Stage 1 HD Woven Organic Disc (10.4" x 1-1/8" x 10 spline) HD Throwout Bearing HD Pilot Bearing Alignment Tool Clutch Installation Guide
ClutchMax

CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1]

Code: CM04021HD-FW167938-ST1
Add Your Review
CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1]
CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1]
CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1] CLUTCHMAX STAGE 1 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HD-FW167938-ST1]
$245.00
In Stock
Add to Wishlist Add to Compare
Category: Chevrolet, GMC, Pontiac

  • 1-4 DAYS DELIVERY

  • 100% ORIGINAL AND QUALITY

  • 12 MONTHS / 15,000 MI GUARANTEE

VEHICLE APPLICATION

  • Fits 1969 - 1974 Chevrolet  Blazer (4.1L 250ci L6)
  • Fits 1969 - 1976 Chevrolet C10, C20; Pickup (4.1L 250ci L6)
  • Fits 1967 - 1979 Chevrolet Camaro (3.8L 230ci L6; 3.8L 231ci V6; 4.1L 250ci L6)
  • Fits 1967 - 1981 Chevrolet Camaro (4.9L 302ci; 5.0L 305ci; 5.0L 307ci; 5.3L 327ci; 5.7L 350ci V8)
  • Fits 1964 - 1973 Chevrolet Chevelle (3.2L 194ci, 3.8L 230ci, 4.1L 250ci L6)
  • Fits 1964 - 1973 Chevrolet Chevelle (4.6L 283ci; 5.0L 307ci; 5.4L 327ci; 5.7L 350ci V8)
  • Fits 1957 - 1978 Chevrolet Corvette (4.6L 283ci; 5.3L 327ci; 5.7L 350ci; 7.0L 427ci V8)
  • Fits 1964 - 1981 Chevrolet El Camino (3.2L 194ci, 3.8L 230ci, 4.1L 250ci L6)
  • Fits 1964 - 1981 Chevrolet El Camino (4.6L 283ci, 5.0L 305ci, 5.3L 327ci, 5.7L 350ci V8)
  • Fits 1975 - 1976 Chevrolet G10, G20 (4.1L 250ci L6)
  • Fits 1975 - 1976 Chevrolet K10, K20 (4.1L 250ci L6)
  • Fits 1976 - 1981 Chevrolet Monte Carlo (3.3L 200ci, 3.8L 231ci V6; 5.0L 305ci V8) 
  • Fits 1975 - 1976 GMC C15, C25 (4.1L 250ci L6)
  • Fits 1975 - 1976 GMC G15 (4.1L 250ci L6)
  • Fits 1967 - 1981 Pontiac Firebird (3.8L 230ci L6; 3.8L 231ci V6; 4.1L 250ci L6)
  • Fits 1967 - 1981 Pontiac Firebird (4.9L 302ci; 5.0L 305ci; 5.3L 327ci; 5.7L 350ci V8)
  • Fits 1964 - 1965 Pontiac GTO (6.4L 389ci V8)

Also fits most GM vehicles with 10.4" clutch and 153 ring gear teeth flywheel. Please refer to compatibility fitment chart.

 

ClutchMax Stage 1 Clutch Kit and HD Flywheel set key features:

  • Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel.
  • Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant.
  • Diaphragm springs made from 51CrV4 steel (imported from Germany) endure a multiple stage, heat-treating process for uncompromising performance and durability.
  • Disc made from HD woven organic friction with high copper content for greater burst strength and durability.
  • Properly suited for daily use, performance street driving and light track use.

 

Torque Capacity:  336 lb-ft

Horsepower Rating:  284 HP

Recommended break-in period:  500 mile

 

What's included in this complete bundle set:

  • Nodular Ductile HD Flywheel (17.08 lbs; 153 ring gear)
  • Performance 10.4" HD Reinforced Pressure Plate
  • Performance Stage 1 HD Woven Organic Disc (10.4" x 1-1/8" x 10 spline)
  • HD Throwout Bearing
  • HD Pilot Bearing
  • Alignment Tool
  • Clutch Installation Guide

VEHICLE APPLICATION

  • Fits 1969 - 1974 Chevrolet  Blazer (4.1L 250ci L6)
  • Fits 1969 - 1976 Chevrolet C10, C20; Pickup (4.1L 250ci L6)
  • Fits 1967 - 1979 Chevrolet Camaro (3.8L 230ci L6; 3.8L 231ci V6; 4.1L 250ci L6)
  • Fits 1967 - 1981 Chevrolet Camaro (4.9L 302ci; 5.0L 305ci; 5.0L 307ci; 5.3L 327ci; 5.7L 350ci V8)
  • Fits 1964 - 1973 Chevrolet Chevelle (3.2L 194ci, 3.8L 230ci, 4.1L 250ci L6)
  • Fits 1964 - 1973 Chevrolet Chevelle (4.6L 283ci; 5.0L 307ci; 5.4L 327ci; 5.7L 350ci V8)
  • Fits 1957 - 1978 Chevrolet Corvette (4.6L 283ci; 5.3L 327ci; 5.7L 350ci; 7.0L 427ci V8)
  • Fits 1964 - 1981 Chevrolet El Camino (3.2L 194ci, 3.8L 230ci, 4.1L 250ci L6)
  • Fits 1964 - 1981 Chevrolet El Camino (4.6L 283ci, 5.0L 305ci, 5.3L 327ci, 5.7L 350ci V8)
  • Fits 1975 - 1976 Chevrolet G10, G20 (4.1L 250ci L6)
  • Fits 1975 - 1976 Chevrolet K10, K20 (4.1L 250ci L6)
  • Fits 1976 - 1981 Chevrolet Monte Carlo (3.3L 200ci, 3.8L 231ci V6; 5.0L 305ci V8) 
  • Fits 1975 - 1976 GMC C15, C25 (4.1L 250ci L6)
  • Fits 1975 - 1976 GMC G15 (4.1L 250ci L6)
  • Fits 1967 - 1981 Pontiac Firebird (3.8L 230ci L6; 3.8L 231ci V6; 4.1L 250ci L6)
  • Fits 1967 - 1981 Pontiac Firebird (4.9L 302ci; 5.0L 305ci; 5.3L 327ci; 5.7L 350ci V8)
  • Fits 1964 - 1965 Pontiac GTO (6.4L 389ci V8)

Also fits most GM vehicles with 10.4" clutch and 153 ring gear teeth flywheel. Please refer to compatibility fitment chart.

 

ClutchMax Stage 1 Clutch Kit and HD Flywheel set key features:

  • Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel.
  • Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant.
  • Diaphragm springs made from 51CrV4 steel (imported from Germany) endure a multiple stage, heat-treating process for uncompromising performance and durability.
  • Disc made from HD woven organic friction with high copper content for greater burst strength and durability.
  • Properly suited for daily use, performance street driving and light track use.

 

Torque Capacity:  336 lb-ft

Horsepower Rating:  284 HP

Recommended break-in period:  500 mile

 

What's included in this complete bundle set:

  • Nodular Ductile HD Flywheel (17.08 lbs; 153 ring gear)
  • Performance 10.4" HD Reinforced Pressure Plate
  • Performance Stage 1 HD Woven Organic Disc (10.4" x 1-1/8" x 10 spline)
  • HD Throwout Bearing
  • HD Pilot Bearing
  • Alignment Tool
  • Clutch Installation Guide

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)