CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5] CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5] ClutchMax VEHICLE APPLICATION Fits 2005 - 2007 Chevrolet Corvette (6.0L OHV 8cyl LS2) Fits 2008 - 2013 Chevrolet Corvette (6.2L OHV 8cyl LS3) Fits 2010 - 2013 Chevrolet Corvette Grand Sport (6.2L OHV 8cyl LS3) Fits 2006 - 2013 Chevrolet Corvette Z06 (7.0L OHV 8cyl LS7) Fits 2013 - 2013 Chevrolet Corvette 427 convertible (7.0L OHV 8cyl LS7)   ClutchMax Stage 5 CSC Clutch Kit and HD Nodular Flywheel set key features: Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel. Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant. Reinforced diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability. Disc made from copper ceramic (cerametallic) pads with precision broached rigid hub for track abuse and maximum power transfer. Properly suited for racing, track use, performance street driving and minimal daily use.   Torque Capacity:  660 lb-ft Horsepower Rating:  683 HP Recommended break-in period:  500 mile   ClutchMax Stage 5 CSC Clutch Kit and Performance Flywheel set comes with: 1 each HD Nodular Flywheel  (168 ring gear, flat step, 23.26 lbs) 1 each Performance Pressure Plate (Non Self-Adjust Type) 1 each Performance Stage 5 Ceramic 6-Puck Rigid Disc (11-3/4" x 1-1/8" x 26) 1 each CSC Slave Cylinder Bearing Unit 1 each Pilot Bearing 1 each Alignment Tool Clutch Installation Guide Note: Our conversion kit must be used together as a set without reusing existing components.
ClutchMax

CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5]

Code: CM04803HDDWS-FW167578-ST5
Add Your Review
CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5] CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5] CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5] CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5] CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5] CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5]
CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5]
CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5] CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5] CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5] CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5] CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5] CLUTCHMAX STAGE 5 CLUTCH KIT & FLYWHEEL WITH SLAVE CYLINDER BUNDLE SET [CM04803HDDWS-FW167578-ST5]
$429.00
In Stock
Add to Wishlist Add to Compare
Category: Chevrolet

  • 1-4 DAYS DELIVERY

  • 100% ORIGINAL AND QUALITY

  • 12 MONTHS / 15,000 MI GUARANTEE

VEHICLE APPLICATION

  • Fits 2005 - 2007 Chevrolet Corvette (6.0L OHV 8cyl LS2)
  • Fits 2008 - 2013 Chevrolet Corvette (6.2L OHV 8cyl LS3)
  • Fits 2010 - 2013 Chevrolet Corvette Grand Sport (6.2L OHV 8cyl LS3)
  • Fits 2006 - 2013 Chevrolet Corvette Z06 (7.0L OHV 8cyl LS7)
  • Fits 2013 - 2013 Chevrolet Corvette 427 convertible (7.0L OHV 8cyl LS7)

 

ClutchMax Stage 5 CSC Clutch Kit and HD Nodular Flywheel set key features:

  • Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel.
  • Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant.
  • Reinforced diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability.
  • Disc made from copper ceramic (cerametallic) pads with precision broached rigid hub for track abuse and maximum power transfer.
  • Properly suited for racing, track use, performance street driving and minimal daily use.

 

Torque Capacity:  660 lb-ft

Horsepower Rating:  683 HP

Recommended break-in period:  500 mile

 

ClutchMax Stage 5 CSC Clutch Kit and Performance Flywheel set comes with:

  • 1 each HD Nodular Flywheel  (168 ring gear, flat step, 23.26 lbs)
  • 1 each Performance Pressure Plate (Non Self-Adjust Type)
  • 1 each Performance Stage 5 Ceramic 6-Puck Rigid Disc (11-3/4" x 1-1/8" x 26)
  • 1 each CSC Slave Cylinder Bearing Unit
  • 1 each Pilot Bearing
  • 1 each Alignment Tool
  • Clutch Installation Guide
  • Note: Our conversion kit must be used together as a set without reusing existing components.

VEHICLE APPLICATION

  • Fits 2005 - 2007 Chevrolet Corvette (6.0L OHV 8cyl LS2)
  • Fits 2008 - 2013 Chevrolet Corvette (6.2L OHV 8cyl LS3)
  • Fits 2010 - 2013 Chevrolet Corvette Grand Sport (6.2L OHV 8cyl LS3)
  • Fits 2006 - 2013 Chevrolet Corvette Z06 (7.0L OHV 8cyl LS7)
  • Fits 2013 - 2013 Chevrolet Corvette 427 convertible (7.0L OHV 8cyl LS7)

 

ClutchMax Stage 5 CSC Clutch Kit and HD Nodular Flywheel set key features:

  • Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X stronger than OE flywheel.
  • Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant.
  • Reinforced diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability.
  • Disc made from copper ceramic (cerametallic) pads with precision broached rigid hub for track abuse and maximum power transfer.
  • Properly suited for racing, track use, performance street driving and minimal daily use.

 

Torque Capacity:  660 lb-ft

Horsepower Rating:  683 HP

Recommended break-in period:  500 mile

 

ClutchMax Stage 5 CSC Clutch Kit and Performance Flywheel set comes with:

  • 1 each HD Nodular Flywheel  (168 ring gear, flat step, 23.26 lbs)
  • 1 each Performance Pressure Plate (Non Self-Adjust Type)
  • 1 each Performance Stage 5 Ceramic 6-Puck Rigid Disc (11-3/4" x 1-1/8" x 26)
  • 1 each CSC Slave Cylinder Bearing Unit
  • 1 each Pilot Bearing
  • 1 each Alignment Tool
  • Clutch Installation Guide
  • Note: Our conversion kit must be used together as a set without reusing existing components.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)