CLUTCHMAX STAGE 3 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM04021HDC-FW167938-ST3]

ClutchMax Stage 3 Clutch Kit and HD Flywheel set key features:

• Flywheel is made from high magnesium content nodular cast iron material for greater strength and extended use. Less expensive than billet steel or chromoly steel flywheels yet 2X stronger than factory OE flywheel.
• Pressure Plate is made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant.
  
• Diaphragm spring is made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability.
• Disc plate is made from copper ceramic (cerametallic) pads with precision broached sprung hub for ultimate holding power and maximum performance.
  
• Properly suited for track use, performance street driving and moderate daily use.

Torque Capacity:  460 lb-ft

Horsepower Rating:  400 HP

Recommended break-in period:  500 mile

What's included in this complete clutch flywheel bundle set:

• 1 each Solid Nodular Ductile HD Flywheel (2X stronger and longer lasting than factory flywheel)
  
• 1each Performance Reinforced Pressure Plate
  
• 1each Performance Stage 3 Ceramic 6-Puck Sprung Disc (10.4" x 1-1/8" x 10 spline)
• 1 each High-Temp HD Throwout Bearing
  
• 1 each HD Pilot Bearing
• 1 each HD Pilot Bushing
  
• 1 each Clutch Alignment Tool
• Clutch Installation Guide

ClutchMax differences:

• Feel:  Improved throttle response. Light to moderate pedal effort. Quick and direct positive engagement.
• Life:   Advanced design and carefully selected material provides extended life.
• Quality:  All products are designed, engineered, assembled, tested and inspected by ClutchMax to ensure highest quality. Proudly engineered and built in the U.S.A.
  

VEHICLE APPLICATION

• Fits 1969 - 1974 Chevrolet  Blazer (4.1L 250ci L6)
• Fits 1969 - 1976 Chevrolet C10, C20; Pickup (4.1L 250ci L6)
• Fits 1967 - 1981 Chevrolet Camaro (3.8L 230ci L6; 3.8L 231ci V6; 4.1L 250ci L6)
• Fits 1967 - 1981 Chevrolet Camaro (4.9L 302ci; 5.0L 305ci; 5.0L 307ci; 5.3L 327ci; 5.7L 350ci V8)
• Fits 1964 - 1973 Chevrolet Chevelle (3.2L 194ci, 3.8L 230ci, 4.1L 250ci L6)
• Fits 1964 - 1973 Chevrolet Chevelle (4.6L 283ci; 5.0L 307ci; 5.4L 327ci; 5.7L 350ci V8)
• Fits 1966 - 1978 Chevrolet Corvette (5.7L 350ci; 7.0L 427ci V8)
  
• Fits 1964 - 1981 Chevrolet El Camino (3.2L 194ci, 3.8L 230ci, 4.1L 250ci L6)
• Fits 1964 - 1981 Chevrolet El Camino (4.6L 283ci, 5.0L 305ci, 5.3L 327ci, 5.7L 350ci V8)
• Fits 1975 - 1976 Chevrolet G10, G20 (4.1L 250ci L6)
• Fits 1975 - 1976 Chevrolet K10, K20 (4.1L 250ci L6)
• Fits 1976 - 1981 Chevrolet Monte Carlo (3.3L 200ci, 3.8L 231ci V6; 5.0L 305ci V8) 
• Fits 1975 - 1976 GMC C15, C25 (4.1L 250ci L6)
• Fits 1975 - 1976 GMC G15 (4.1L 250ci L6)
• Fits 1967 - 1981 Pontiac Firebird (3.8L 230ci L6; 3.8L 231ci V6; 4.1L 250ci L6)
• Fits 1967 - 1981 Pontiac Firebird (4.9L 302ci; 5.0L 305ci; 5.3L 327ci; 5.7L 350ci; 6.6L 400ci V8)
• Fits 1964 - 1972 Pontiac GTO (6.4L 389; 6.6L 400ci V8)

Also fits most GM vehicles with 10.4" clutch and 153 ring gear teeth flywheel. Please refer to compatibility fitment chart.