CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] ClutchMax VEHICLE APPLICATION Fits 2000 - 2000 BMW 328Ci (E46; 2.8L 6cyl M52TUB28) Fits 1999 - 2000 BMW 328i (E46; 2.8L 6cyl M52TUB28) Fits 2001 - 3/2003 BMW 330Ci (E46; 3.0L 6cyl M54B30; Fits 5-speed only) Fits 2001 - 3/2003 BMW 330i (E46; 3.0L 6cyl M54B30; Fits 5-speed only) Fits 2001 - 3/2003 BMW 330Xi (E46; 3.0L 6cyl M54B30; Fits 5-speed only) Fits 1999 - 2000 BMW 528i (E39; 2.8L 6cyl M52TUB28) Fits 2001 - 2003 BMW 530i (E39; 3.0L 6cyl M54B30) Fits 1999 - 2000 BMW Z3 (2.8L 6cyl M52TUB28) Fits 2001 - 2002 BMW Z3 (3.0L 6cyl M54B30)   Note: Clutch and flywheel must be used together as a set without reusing any existing components   ClutchMax Stage 4 Clutch Kit and HD Flywheel set key features: Flywheel is made from high magnesium content nodular cast iron for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X durable than OE flywheel. Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant. Proprietary single diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability. Disc made from copper ceramic (cerametallic) pads with broached sprung hub for ultimate holding power and maximum performance. Properly suited for track use, performance street driving and moderate daily use.   Torque Capacity:  382 lb-ft Horsepower Rating:  461 HP Recommended break-in period:  500 mile   What's included in this complete clutch flywheel bundle set: 1 each Solid HD Nodular Cast Flywheel (Replaces heavy and inconsistent factory dual mass flywheel) 1 each Performance HD Pressure Plate 1 each Performance Stage 4 Ceramic 6-Puck Sprung Disc (9-7/16 in. X 1-1/8 in. X 10 spline) 1 each Release (Throw-out) Bearings 1 each Pilot (Spigot) Bearing 6 each Pressure Plate Mounting Bolts 8 each Flywheel Mounting Bolts 1 each Clutch Alignment Tool Clutch Installation Guide
ClutchMax

CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4]

Code: CM03949HDCFW-ST4
Add Your Review
CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4]
CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4]
CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4] CLUTCHMAX STAGE 4 CLUTCH KIT & FLYWHEEL BUNDLE SET [CM03949HDCFW-ST4]
$297.00
In Stock
Add to Wishlist Add to Compare
Category: BMW

  • 1-4 DAYS DELIVERY

  • 100% ORIGINAL AND QUALITY

  • 12 MONTHS / 15,000 MI GUARANTEE

VEHICLE APPLICATION

  • Fits 2000 - 2000 BMW 328Ci (E46; 2.8L 6cyl M52TUB28)
  • Fits 1999 - 2000 BMW 328i (E46; 2.8L 6cyl M52TUB28)
  • Fits 2001 - 3/2003 BMW 330Ci (E46; 3.0L 6cyl M54B30; Fits 5-speed only)
  • Fits 2001 - 3/2003 BMW 330i (E46; 3.0L 6cyl M54B30; Fits 5-speed only)
  • Fits 2001 - 3/2003 BMW 330Xi (E46; 3.0L 6cyl M54B30; Fits 5-speed only)
  • Fits 1999 - 2000 BMW 528i (E39; 2.8L 6cyl M52TUB28)
  • Fits 2001 - 2003 BMW 530i (E39; 3.0L 6cyl M54B30)
  • Fits 1999 - 2000 BMW Z3 (2.8L 6cyl M52TUB28)
  • Fits 2001 - 2002 BMW Z3 (3.0L 6cyl M54B30)

 

Note: Clutch and flywheel must be used together as a set without reusing any existing components

 

ClutchMax Stage 4 Clutch Kit and HD Flywheel set key features:

  • Flywheel is made from high magnesium content nodular cast iron for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X durable than OE flywheel.
  • Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant.
  • Proprietary single diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability.
  • Disc made from copper ceramic (cerametallic) pads with broached sprung hub for ultimate holding power and maximum performance.
  • Properly suited for track use, performance street driving and moderate daily use.

 

Torque Capacity:  382 lb-ft

Horsepower Rating:  461 HP

Recommended break-in period:  500 mile

 

What's included in this complete clutch flywheel bundle set:

  • 1 each Solid HD Nodular Cast Flywheel (Replaces heavy and inconsistent factory dual mass flywheel)
  • 1 each Performance HD Pressure Plate
  • 1 each Performance Stage 4 Ceramic 6-Puck Sprung Disc (9-7/16 in. X 1-1/8 in. X 10 spline)
  • 1 each Release (Throw-out) Bearings
  • 1 each Pilot (Spigot) Bearing
  • 6 each Pressure Plate Mounting Bolts
  • 8 each Flywheel Mounting Bolts
  • 1 each Clutch Alignment Tool
  • Clutch Installation Guide

VEHICLE APPLICATION

  • Fits 2000 - 2000 BMW 328Ci (E46; 2.8L 6cyl M52TUB28)
  • Fits 1999 - 2000 BMW 328i (E46; 2.8L 6cyl M52TUB28)
  • Fits 2001 - 3/2003 BMW 330Ci (E46; 3.0L 6cyl M54B30; Fits 5-speed only)
  • Fits 2001 - 3/2003 BMW 330i (E46; 3.0L 6cyl M54B30; Fits 5-speed only)
  • Fits 2001 - 3/2003 BMW 330Xi (E46; 3.0L 6cyl M54B30; Fits 5-speed only)
  • Fits 1999 - 2000 BMW 528i (E39; 2.8L 6cyl M52TUB28)
  • Fits 2001 - 2003 BMW 530i (E39; 3.0L 6cyl M54B30)
  • Fits 1999 - 2000 BMW Z3 (2.8L 6cyl M52TUB28)
  • Fits 2001 - 2002 BMW Z3 (3.0L 6cyl M54B30)

 

Note: Clutch and flywheel must be used together as a set without reusing any existing components

 

ClutchMax Stage 4 Clutch Kit and HD Flywheel set key features:

  • Flywheel is made from high magnesium content nodular cast iron for greater strength and extended use. Less expensive than billet steel, chromoly steel or billet aluminum flywheels yet 2X durable than OE flywheel.
  • Pressure Plate made from Ductile/ Nodular Cast Iron for maximum strength and highest wear resistant.
  • Proprietary single diaphragm springs made from 51CrV4 steel endure a multiple stage, heat-treating process for uncompromising performance and durability.
  • Disc made from copper ceramic (cerametallic) pads with broached sprung hub for ultimate holding power and maximum performance.
  • Properly suited for track use, performance street driving and moderate daily use.

 

Torque Capacity:  382 lb-ft

Horsepower Rating:  461 HP

Recommended break-in period:  500 mile

 

What's included in this complete clutch flywheel bundle set:

  • 1 each Solid HD Nodular Cast Flywheel (Replaces heavy and inconsistent factory dual mass flywheel)
  • 1 each Performance HD Pressure Plate
  • 1 each Performance Stage 4 Ceramic 6-Puck Sprung Disc (9-7/16 in. X 1-1/8 in. X 10 spline)
  • 1 each Release (Throw-out) Bearings
  • 1 each Pilot (Spigot) Bearing
  • 6 each Pressure Plate Mounting Bolts
  • 8 each Flywheel Mounting Bolts
  • 1 each Clutch Alignment Tool
  • Clutch Installation Guide

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)